Sange Mulberry Court weathering wooden lacquer wood surfaces can add a layer of protective film, so that it can achieve resistance to UV radiation, waterproof, moisture-proof, anti-peeling and mildew role. So you no longer have changed the old wood, dirty and difficult to clean other troubles! Mulberry Court in sange wood oil as base oil, where applicable requirements have film. - Semi-open timber breathable - superior penetration, adhesion, combined with durable wood; - the film is not warped, no peeling - wear-resistant, flexible, clear anti-aging deformation of wood; - lasting resistance to UV radiation, more waterproof, moisture, mildew; - static, harmless, and can prevent fine dust, dirt, easy to clean - natural plant odor, dry and odorless. Instructions for use: underside requirements: wood drying, the surface free of dirt and grease. Construction Methods: Available brushing, spraying, roller coating method. 1, to be carried out at temperatures above 10 ℃ processing; 2, Stir before use; 3 wood with a fine sandpaper and clean; 4, in the wood surface, along the grain direction, full uniform coat of paint . Or use reference mulberry Court weathering wood oil, wood oil weathering coat for base oil; 5, after hard work, you can apply a second layer of wood paint. 6, the proposed secondary brushing. (Six faces painted protective better) Dosage: theoretically available for 12-14 square meters per liter. Drying time: under 20 ℃ moderate air humidity is dry after about 20 minutes, 12-24 hours of hard work. The actual drying time will vary depending on temperature and humidity changes, recoat time changes accordingly. Note: The high oil content of the timber, as some tropical trees or damp wood may prolong the drying time; coating is too thick will significantly prolong the drying time. Duration: at least three years without unsealing dilution: has been diluted, after opening the can be used directly. You can add the right amount of water when needed. But not too much. Tool Cleaning: immediately after use with soap and warm water and an alkaline cleaner, then washed with water. When a break halfway, the tool is immersed in water.