Sange waterborne outdoor wood paint for use: underside requirements: wood drying, the surface free of dirt and grease. Construction Methods: Available brushing, spraying, roller coating method. 1, to be carried out at temperatures above 10 ℃ processing; 2, Stir before use; 3 wood with a fine sandpaper and clean; 4, in the wood surface, along the grain direction, full uniform coat of paint . Or use reference mulberry Court weathering wood oil, wood oil weathering coat for base oil; 5, after hard work, you can apply a second layer of wood paint. 6, the proposed secondary brushing. (Six faces painted protective better) Dosage: theoretically available for 12-14 square meters per liter. Drying time: under 20 ℃ moderate air humidity is dry after about 20 minutes, 12-24 hours of hard work. The actual drying time will vary depending on temperature and humidity changes, recoat time changes accordingly. Note: The high oil content of the timber, as some tropical trees or damp wood may prolong the drying time; coating is too thick will significantly prolong the drying time. Duration: at least three years without unsealing dilution: has been diluted, after opening the can be used directly. You can add the right amount of water when needed. But not too much. Tool Cleaning: immediately after use with soap and warm water and an alkaline cleaner, then washed with water. When a break halfway, the tool is immersed in water.